Balança de precisão C32.60.PM

Visão geral

As balanças da série C32.PM foram projetadas para permitir a determinação precisa da massa em laboratório. Dosagem, formulação e contagem de peças são apenas algumas das possíveis aplicações desses dispositivos multifuncionais. As balanças PM não apenas fornecem leituras precisas e medições rápidas, como também são versáteis, permitindo seu uso em diversos setores industriais.

Precisão Laboratorial em Condições Industriais

• A capacidade de pesar cargas de até 120 kg em um prato de pesagem grande com alta precisão e boa repetibilidade,
• erro de excentricidade mínimo em toda a faixa de pesagem,
• medição rápida e estável (alcançável em 1 segundo),
• estabilidade dos parâmetros ao longo do tempo e durante o transporte,
• dimensões do prato de pesagem adaptadas à precisão da balança

são as características distintivas das balanças RADWAG PM. Tudo isso é possível graças ao uso de um sistema de medição de ponta baseado na tecnologia

MONO

BLOCK^®

aprimorada da RADWAG, que oferece precisão laboratorial em condições industriais. A mudança no design possibilitou trabalhar com uma resolução de 0,01 g com capacidade máxima de 20 kg e 0,2 g com capacidade máxima de 120 kg, com repetibilidade de 0,01 g e resistência a variações nas condições ambientais.

As balanças PM também incluem:

• design robusto baseado em um monobloco maior e mais alto,
• sistema de proteção contra sobrecarga de 4 pontos integrado,
• proteção IP 43 contra entrada de água e poeira,
• ajuste interno,
• display colorido de 5 polegadas,
• inicialização fácil, operação intuitiva e ergonomia.

As balanças PM são ideais para aplicações que exigem equipamentos de pesagem de alta precisão e alta capacidade de carga.

Interfaces de comunicação

O terminal padrão está equipado com interfaces RS232, USB-A, USB-B, 4 IN/4 OUT e Ethernet, que facilitam tanto a cooperação com periféricos como impressoras ou computadores quanto a troca de dados usando unidades USB.

O terminal se conecta a redes sem fio graças a um módulo de conexão sem fio, que vem incluso.

Sistema THBR 2.0
Compatibilidade com o Sistema THBR 2.0 para monitoramento das condições ambientais.

* RFID ISO/IEC 14443 Tipo A, 13,56 MHz

Funções

Labelling

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).

Plus/Minus Control

Control of sample's mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

Percent Weighing

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

Parts counting

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

Statistics

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.

IR sensors

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.

GLP Procedures

Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.

Animal weighing

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

Density determination

Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of under-pan weighing. Tested load of significant size may be measured this way.

Replaceable unit

Weight function to change the weight unit.

ALIBI Memory

"ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.