Uma unidade da AKRIBIS One

lws-activecount-Series

ActiveCount microbial air samplers

Meet ActiveCount… the portable microbial air sampler for cleanrooms and aseptic environments. With self-adjusting flow control and programmable settings, experience a new practical approach to routine sampling.

Solicitar cotaçãoBaixar ficha técnica

ActiveCount microbial air samplers

Description

ActiveCount Microbial Air Sampler

ActiveCount100H

Documents are currently available in English only. Additionally languages will be available soon.

Different routines.One familiar sampler.

The monitoring plan sets the routine. Continuous, periodic, and gas sampling modes let teams select an approach that fits their process. For work that calls for a separate impactor, the optional Remote Impactor Kit is available for ActiveCount100H and ActiveCount25H. An optional compressed gas sampler supports gas sampling workflows.

ActiveCount microbial air samplers

Sampling confidence.Built in.

ActiveCount brings self-adjusting flow control to cleanroom microbial monitoring. A portable microbial air sampler for teams working in an aseptic environment.

Confidence startsat collection.

Regulated work calls for clearly defined sampling performance. ActiveCount100H is EN17141 compliant, with a d50 collection efficiency of 1µm. That gives your QA and validation teams documented performance to assess against their monitoring requirements.

ActiveCount microbial air samplers

Less setup.More sampling.

Routine sampling should feel routine. A touchscreen puts eight programmable sampling volumes, 50 user names, and 400 locations within easy reach. Self-adjusting flow control supports accurate sampling, with flow rate alarms to flag changes that need attention. An internal battery supports 8 to 10 hours of normal use, with AC operation available for stationary sampling.

ActiveCount microbial air samplers

Every sample has a story.

Traceability starts with the details. USB data logging records the user, location, sample volume, timing, and status, giving teams the context behind each sampling run. Password-protected sample settings help keep setup changes under control. Compatibility with the Rapid Micro Biosystems® Growth Direct System supports labs using that microbiology workflow.

ActiveCount25H

Best for sampling at 25 L/min when the plan calls for a lower flow rate and HEPA-filtered exhaust.

ActiveCount microbial air samplers

ActiveCount100

Best for routine sampling at 100 L/min when HEPA-filtered exhaust is not a selection requirement.

Frequently Asked Questions

ActiveCount is a portable microbial air sampler for cleanrooms and aseptic environments. It supports cleanroom microbial monitoring with programmable sampling and self-adjusting flow control.

ActiveCount100Hsamples at 100 liters per minute with HEPA-filtered exhaust. ActiveCount25Hsamples at 25 liters per minute with HEPA-filtered exhaust. ActiveCount100 samples at 100 liters per minute.

ActiveCount100H is EN17141 compliant, with a d50 collection efficiency of 1 micron.

ActiveCount100H and ActiveCount25H have HEPA-filtered exhaust. On ActiveCount100H, the exhaust ports are positioned to avoid drawing sampled air back into the sampler.

The sampling head, dust cover, and removable Petri dish holder on the H models are autoclavable. The stainless steel enclosure is sanitizable and supports routine wipedowns.

ActiveCount microbial air samplers

Yes. ActiveCount offers eight programmable sampling volumes, selectable through the touchscreen interface.

Yes. ActiveCount supports 50 programmable user names and 400 programmable location names, so technicians can select saved entries during setup.

ActiveCount uses self-adjusting flow control to support accurate sampling. Flow rate alarming alerts technicians to airflow issues that need attention.

The published battery specification is 8 to 10 hours of normal use. ActiveCount can operate from an AC adapter for stationary sampling.

ActiveCount logs sampling data to a USB flash drive, providing a way to transfer sampling records for review.

Yes. Password security protects sample settings, helping teams control changes to the sampling setup.

Yes. ActiveCount offers gas sampling mode and an optional compressed gas sampler accessory.

Yes. An optional Remote Impactor Kit is available for ActiveCount100H and ActiveCount25H . It provides a remote sampling option for these models.

ActiveCount microbial air samplers

Yes. ActiveCount is listed as compatible with the Rapid Micro Biosystems Growth Direct System.

Remote Impactor Kit

A scalable and modular remote accessory system engineered to meet the demands of tight enclosed environments within regulated cleanrooms.

ActiveCount Remote Impactor Kit

Viable sampling should fit your day, not slow it down. The ActiveCount Remote Impactor Kit gives your team a compact, modular way to sample in regulated cleanrooms, with either petri plates or Rapid Micro Bio (RMB) cassettes. Pair it with an ActiveCount25H or ActiveCount100H, or connect it to your house vacuum. Then pick the flow rate that suits the job: 10, 25, 28.3, or 100 LPM.

Tight spots are no trouble. The low-profile impactor samples from the side or the bottom, and a sanitary flange accessory makes isolators and LAF cabinets easy to reach. Every part is autoclavable, and each sample head carries a laser-etched barcode that holds up through cleaning, so tracking stays simple. Start with one location today, add more zones next month, and we’ll help you build a setup that fits your workflow.

ActiveCount microbial air samplers

Gas Sampler

The gas sampler adapter lets your ActiveCount sample compressed gas lines, so you can test the air that touches your product, rounding out your viable program, from portable samplers to remote and continuous monitoring options.

ActiveCountR

ActiveCountR delivers continuous, reliable microbial sampling. Every remote unit connects to your facility monitoring system and supports EN17141 and EU GMP Annex 1 compliance. Together they give you a complete, confident picture of your critical environments.

ActiveCount microbial air samplers

ActiveCountRp

ActiveCountRp brings its own integrated pump and HEPA-filtered exhaust to continuous, cGMP-compliant sampling. Easily combine with sampling heads and monitoring systems that turn a self-contained sampler into a complete, EN17141-ready program.

ActiveCount microbial air samplers

ActiveCount100

ActiveCount100 is a high-performance portable microbial sampler suitable for cleanrooms and aseptic environments. Continuous and periodic sampling enables complete control of sampling cycles and intervals.

The impactor head and dust cover are entirely autoclavable. You will find these components easily removed and installed on the chemically compatible and sanitizable stainless steel enclosure of the AC100. The optional gas sampler attachment can be used to monitor compressed gasses.

Features

  • 3.5 inch (8.9 cm) color touch screen
  • Intuitive user interface
  • 8 programmable sampling volumes
  • 50 programmable user names
  • 400 programmable location names
  • Flow rate alarming
  • Data logging to USB flash drive
  • Autoclavable sampling head
  • AC/battery 8 hrs normal use
  • Continuous, periodic, and gas sampling modes
  • Suitable for sterile conditions
  • Wipe downable
  • Optional compressed gas sampler

Designed to meet the industry need for continuous trouble-free operation and flexible running parameters, the ActiveCountR is the right choice to meet your viable sampling needs.

When viable sampling is part of your day-to-day, you need tools that adapt—not ones that hold you back. The ActiveCount Remote Impactor Kit is modular, scalable, and ready to meet the demands of regulated cleanroom environments.

ActiveCount microbial air samplers

Technical details (ActiveCount100)

SpecificationActiveCount100HActiveCount25HActiveCount100
Flow Rate100 liters/minute ± 4%25 liters/minute ± 5%100 liters/minute ± 4%
Autoclavable Impactor Head316L Stainless Steel with 300 holes, / 19m/sec316L Stainless Steel with 88 holes, / 19m/sec316L Stainless Steel with 300 holes, / 19m/sec
Autoclavable Dust Cover316L Stainless Steel316L Stainless Steel316L Stainless Steel
BaseplateRemovable, magnetic, autoclavableRemovable, magnetic, autoclavableNon- Removable
ExhaustHEPA filtered, captures 99.97% of particles at 0.3 μmHEPA filtered, captures 99.97% of particles at 0.3 μmNon-filtered
Battery8 Hrs. continuous, 10 Hrs. normal sampling8 Hrs. continuous, 10 Hrs. normal sampling8 Hrs. continuous, 10 Hrs. normal sampling
Weight6.75 lbs6.75 lbs6.75 lbs
Petri dish compatibilityCompatible with standard 90 mm petri dish (85mm-92mm), and Rapid Micro Bio Systems CassetteCompatible with standard 90 mm petri dish (85mm-92mm), and Rapid Micro Bio Systems CassetteCompatible with standard 90 mm petri dish (85mm-92mm), and Rapid Micro Bio Systems Cassette
USB portUSB 2.0 port (8 GB flash drive included)USB 2.0 port (8 GB flash drive included)USB 2.0 port (8 GB flash drive included)
Data recordsUnlimited; saved on USB flash drive in .csv file formatUnlimited; saved on USB flash drive in .csv file formatUnlimited; saved on USB flash drive in .csv file format
Log data fieldsStart date, time, location, user, sample duration, flow duration, volume, cycles, statusStart date, time, location, user, sample duration, flow duration, volume, cycles, statusStart date, time, location, user, sample duration, flow duration, volume, cycles, status
Handle - monopod mountableMonopod mountable handle 3/8-16, includes 1/4-20 threaded adapterMonopod mountable handle 3/8-16, includes 1/4-20 threaded adapterMonopod mountable handle 3/8-16, includes 1/4-20 threaded adapter
Enclosure316L Stainless Steel316L Stainless Steel316L Stainless Steel
Power24 VDC power adapter (100-240V ~ 1.5A 50-60Hz)24 VDC power adapter (100-240V ~ 1.5A 50-60Hz)24 VDC power adapter (100-240V ~ 1.5A 50-60Hz)
CalibrationAnnualAnnualAnnual
Operating environment0-90% humidity non condensing, 0-40°C sampling, 0-35°C charging0-90% humidity non condensing, 0-40°C sampling, 0-35°C charging0-90% humidity non condensing, 0-40°C sampling, 0-35°C charging
Dimensions7.6”(h) x 4.7“(w) x 4.7”(d) [ 19.4 (h) x 12.0 (w) x 12.0 (d) cm]7.6”(h) x 4.7“(w) x 4.7”(d) [ 19.4 (h) x 12.0 (w) x 12.0 (d) cm]7.6”(h) x 4.7“(w) x 4.7”(d) [ 19.4 (h) x 12.0 (w) x 12.0 (d) cm]

ActiveCount100H

The ActiveCount100H is a high-performance portable active air sampler suitable for use in cleanrooms and aseptic environments. The ActiveCount100H is ISO 14698 compliant with a d50 collection efficiency of 1 micron and HEPA filtered exhaust ports designed to avoid re-aspiration of sampled air. The ActiveCount100H offers self-adjusting flow control to ensure accurate sampling and continuous & periodic sampling modes for optimum sampling flexibility.

The impactor head, dust cover, and adjustable petri dish holder are entirely autoclavable. You will find these components easily removed and installed on the chemically compatible and sanitizable stainless steel enclosure of the AC100H.

This unit’s exhaust is HEPA filtered to ensure ActiveCount100H will not contaminate your critical environments.

The optional remote sample head minimizes disturbance of unidirectional airflow within a biological safety cabinet or laminar flow bench. The gas sample option provides the versatility needed to accomplish all your critical sampling requirements.

ActiveCount microbial air samplers
  • 3.5 inch (8.9 cm) color touch screen
  • Compatible with Rapid Micro Biosystems Growth Direct System
  • ISO 14698-1 compliant
  • HEPA filtered exhaust
  • 8 programmable sampling volumes
  • 50 programmable user names
  • 400 programmable location names
  • Flow rate alarming
  • Data logging to USB flash drive
  • Password security for sample settings
  • Autoclavable sampling head and dust cover
  • Removable autoclavable petri dish holder (Patent Pending)
  • 24 VAC adapter or internal battery 10 hours normal use
  • Continuous, Periodic and Gas sampling modes
  • Wipedownable and suitable for sterile conditions
ActiveCount microbial air samplers

ActiveCount25H

The ActiveCount25H is a high-performance portable active air sampler suitable for use in cleanrooms and aseptic environments. The ActiveCount25H is ISO 14698 compliant with a d50 collection efficiency of 1 micron and HEPA filtered exhaust ports designed to avoid re-aspiration of sampled air. The ActiveCount25H offers self-adjusting flow control to ensure accurate sampling and continuous & periodic sampling modes for optimum sampling flexibility.

The impactor head, dust cover, and adjustable magnetic petri dish holder are entirely autoclavable. You will find these components easily removed and installed on the chemically compatible and sanitizable stainless steel enclosure of the AC25H.

  • Sample rate: 25 liters per minute
  • 3.5 inch (8.9 cm) color touch screen
  • ISO 14698-1 compliant
  • HEPA filtered exhaust
  • 8 programmable sampling volumes
  • 50 programmable user names
  • 400 programmable location names
  • Flow rate alarming
  • Altitude Compensated
  • Data logging to USB flash drive
  • Password security for sample settings
  • Autoclavable sampling head and dust cover
  • Removable baseplate2, magnetic and autoclavable
  • 100-240VAC adapter and internal battery 10 hours normal1 use
  • Continuous, Periodic and Gas sampling modes
  • Wipedownable and suitable for sterile conditions

1 Normal Use is defined as sampling 10 minutes, pausing 5 minutes and repeating.

ActiveCount microbial air samplers

Configurar o equipamento

Escolha modelo, sondas e acessórios. As combinações incompatíveis são bloqueadas na hora; as demais regras são verificadas ao adicionar o equipamento à cotação.

Documentos