Model-983
The Isotech Small Hotplate is a lightweight portable calibration system purpose designed for surface mounted sensors. The flat surface plate is made from precision-machined aluminum. The sensor to be tested is simply placed on the surface, for higher accuracy a calibrated surface sensor can be placed alongside and the two compared.
Solicitar cotizaciónDescargar ficha técnica
Good thermal contact is ensured by the flat disk that is recessed to allow the optional use of a heat transfer paste or fluid. Uniform heat distribution is achieved with a flat spiral heater clamped to an integrating block below the surface of the plate. The typical accuracy that can be achieved 1°C but this will be influenced by the type of sensor to be calibrated.
The internal control sensor is located immediately below the plate’s surface.
A protective cover that can fit over the block is included along with a comprehensive handbook.
The temperature range is from 35°C to 350°C, which is set by an advanced, but easy to use temperature controller.
The controller has 0.01 resolution below 100°C (0.1° above 100°). A PC interface is included as standard along with an RS232 converter lead and Windows software.
| Model | 983 Small Hot Plate |
|---|---|
| Temperature Range | 35°C to 350°C |
| Stabilisation Time | 10 minutes |
| Cools from | 350°C to 100°C in 125 minutes |
| Heats from | 50°C to 350°C in 20 minutes |
| Uncertainties | Dependent on sensors and method of use 1°C typical |
| Calibration Volume | Flat Plate 71mm diameter |
| Display Resolution | 0.01 to 99.99, 0.1 100 to 350.0 PC can display 0.01 across whole range with the software included |
| Units | °C, °F, K |
| Power | 100 to 115V (50/60Hz) or 200 to 230V (50/60 Hz) 200 Watts |
| Dimensions | Height 115mm Width 230mm Depth 225mm |
| Weight | 3.9kg |
| How to order | 983 Small Hot Plate: Please specify voltage required. |
Isotech Semi-Standard Platinum Resistance Thermometers are designed for applications requiring high accuracy, good long-term stability and greater…
Isotech’s Quick Cal range of testers are ideally suited to the less exacting applications where our larger, better specified baths are unnecessary.
Quite simply the Isotech TTI-22 High Accuracy Thermometer sets new standards in the price to performance ratio for industrial and secondary…
Instrumentos para cotizar
Todavía no hay instrumentos. Se puede escribir igual: un especialista responde.
