Uma unidade da AKRIBIS One
Solicitar cotação

Model-989

Blackbody Source Model 989

Isotech first introduced the Model 988 to assist in relation to the SARS outbreak during the early 2000s. Used to increase the accuracy of thermal imagers being used to measure human skin temperature in temperature screening of applications. Following the increased demand in relation to COVID-19, Isotech have now introduced an updated blackbody source, Model 989.

Solicitar cotaçãoBaixar ficha técnica

Blackbody Source Model 989

Features

  • Improves accuracy of Fever Detection Systems
  • Check Non-Contact Thermometers
  • Uses a solid state thermoelectric heat pump so that the block can be both cooled and heated
Blackbody Source Model 989

Description

Model 989 has the same performance as the earlier 988 but is smaller and has two easy mounting points fitted allowing for ease of use. When used in conjunction with IR cameras, the device can easily be suspended from above or below using standard tripod mounting brackets. The upgraded controller that is used can either be locked to a single temperature or it can be adjusted over a new wider temperature range of 20°C to 50°C. Model 989 also has a PC interface fitted as standard that allows the temperature to be both monitored and adjusted from a PC.

This Model 989 blackbody source meets the demand for a simple, cost effective but high accuracy device for the calibration of thermal imagers and infrared thermometers that are used at temperatures around that of the human body. Unlike heat only devices, this model uses a solid state thermoelectric heat pump so that the block can be both cooled and heated. This brings two benefits, the blackbody can maintain its set point in high ambient temperature conditions and it can also operate below the ambient temperature.

Blackbody Source Model 989

Response time is very fast, typically less than five minutes to achieve the required temperature (see graphs). The Model 989 can be used either horizontally or vertically. The device features a high emissivity ridged plate that is 70mm in diameter. The temperature of the plate can be set from 20°C to 50°C to a resolution of 0.01°C.

To reduce sensitivity to air draughts and ambient temperature effects, a stainless steel tube can be fitted in front of the plate with evaluation showing this has advantages over an open plate design. The longer tube length is 210mm while the shorter tube is 40mm long and is particularly useful for checking medical thermometers. For applications where the unit is used at a single fixed temperature, e.g. 38°C, the set temperature on the controller can be locked to prevent accidental change or tampering. The operating unit can be changed from Celsius to Fahrenheit.

Blackbody Source Model 989

Specifications

Temperature Range20°C to 50°C
Resolution0.01°C
Target Size70mm Diameter
(Using Extension Tube)54mm Diameter
Combined Accuracy / Stability± 0.2°C
PC InterfaceIncluded, optional cable
Units°C, °F, K
Block Stability< ± 0.01°C
Power60 Watts
Voltage12 Vdc Universal supply included
Dimensions200mm x 135mm x 170mm
Weight4kg

Documentos

  • Model-975

    Greybody Source Model 975

    When the high accuracy of the Gemini R is not necessary this product offers a cost effective solution for the calibration and testing of infrared…

  • Model-991

    991 Tympanic Thermometer Checker

    Addressing Calibration Challenges Traditional calibration methods using stirred water baths are cumbersome, expensive, and not easily portable…

  • Medusa-R-999

    Medusa R Model 999

    The Medusa R Blackbody Calibration Source allows for calibration of noncontact infrared thermometers over the temperature range 30°C to 550°C.

  • Oberon-R-426

    Oberon R Model 426

    The Oberon R uses a Sodium heat Pipe to ensure an exceptionally low temperature gradient along the furnace core. It is ideal for the realization of…

  • Model-984

    Gas Flow Model 984

    The higher temperature Isotech Blackbody Fixed Point Cells consist of high purity metals within a graphite body. Graphite reacts with air to form…

  • Pegasus-R-970

    Pegasus R Model 970

    The Pegasus R is a compact furnace for calibrating radiation pyrometers.

  • Model-988

    Blackbody Source Model 988

    Improves Accuracy of Fever Detection Systems; Can be used either horizontally or vertically.; Check Non-Contact Thermometers; Features a high…