Pegasus-R-970
The Pegasus R is a compact furnace for calibrating radiation pyrometers.
Solicitar cotizaciónDescargar ficha técnica
The temperature of the furnace is set on a controller, whilst an independent indicator, whose sensor fits into the cavity, indicates the actual radiance temperature. The sensor can be removed for external calibration or the complete system can be calibrated.
The cavity diameter is 20mm, the depth 65mm. Emissivity is 0.995. The cavity is removable and a fixed point cell may be put in its place. The cavity inside the fixed point cell is 10mm in diameter by 65mm deep to the tip of a 120° cone.
Blackbody target radiation source for use with Pegasus R.
For calibration radiation thermometers in the wavelength range 0.9 to 14 micrometres. A blackbody radiation source ‘based on a design study by England’s National Physical Laboratory (NPL)’ for Isothermal Technology Ltd is housed, with suitable insulation, in the Pegasus tube furnace. The aperture is 20mm in diameter.
A Pegasus blackbody source has been calibrated at NPL (Nat. Physical Laboratory) with an uncertainty of ±2°C and the calibration was found to be reproducible after a period of about 2 months. A scan across the aperture at 444°C showed that the source was uniform to better than 0.3°C.
Traceability may be established with a UKAS certificate for the in-built indicator and supplied probe (935-14-115).
| Model | 970 |
|---|---|
| Temperature Range | 150°C to 1200°C |
| Emissivity | 0.995 |
| Stability | ±0.1°C |
| Display Resolution | 0.1°C to 999.9; 1°C from 1000 to 1200 |
| Cavity Size | 20mm diameter 65mm deep |
| Heating Rate | 25°C/minute |
| PC Interface | Included |
| Power | 800 Watts typical 100-130 or 208-240 Vac 50/60Hz |
| Dimensions | Height 310mm Width 265mm Depth 200mm |
| Weight | 13kg |
| Options | Indium BlackBody Cell – 970-06-00A Tin BlackBody Cell – 970-06-00B Zinc BlackBody Cell – 970-06-00C Aluminium BlackBody Cell – 970-06-00D Silver BlackBody Cell – 970-06-00E Probe 935-14-40 Carrying Case – 931-22-64 Gas Flow System – 984-00-00 |
| How to order | Model 970 Pegasus R – Please state supply voltage required. Please state any special calibration requirements. |
When the high accuracy of the Gemini R is not necessary this product offers a cost effective solution for the calibration and testing of infrared…
The Medusa R Blackbody Calibration Source allows for calibration of noncontact infrared thermometers over the temperature range 30°C to 550°C.
When the high accuracy of the Gemini R is not necessary this product offers a cost effective solution for the calibration and testing of infrared…
The higher temperature Isotech Blackbody Fixed Point Cells consist of high purity metals within a graphite body. Graphite reacts with air to form…
The Cyclops Model 878 is a spherical blackbody source. It consists of an inner black sphere that sits inside a spherical furnace and is suitable for…
Addressing Calibration Challenges Traditional calibration methods using stirred water baths are cumbersome, expensive, and not easily portable…
Improves Accuracy of Fever Detection Systems; Can be used either horizontally or vertically.; Check Non-Contact Thermometers; Features a high…
The Oberon R uses a Sodium heat Pipe to ensure an exceptionally low temperature gradient along the furnace core. It is ideal for the realization of…
The Hyperion R Portable Blackbody Calibration Source allows for calibration of non-contact infrared thermometers over the temperature range -20°C to…
Primary Standard cells fit into the Medusa and Oberon, covering from Indium to Copper Points. These cylindrical cells are 42mm diameter and have a…
Isotech first introduced the Model 988 to assist in relation to the SARS outbreak during the early 2000s. Used to increase the accuracy of thermal…
Instrumentos para cotizar
Todavía no hay instrumentos. Se puede escribir igual: un especialista responde.
