Uma unidade da AKRIBIS One
Solicitar cotação

Annealing-Furnace

Annealing Furnace

The Annealing Furnace, model 414, is designed to heat, anneal and cool Standard Platinum Resistance Thermometers (SPRTs) prior to calibration. The temperature range of the Furnace, from ambient to 1000°C, enables all types of SPRTs to be annealed.

Solicitar cotaçãoBaixar ficha técnica

Annealing Furnace

Features

  • Designed to pre-warm and anneal Standard Platinum Resistance Thermometers
  • Maintenance Free Use
  • Automatic Temperature Cycling
Annealing Furnace

Description

  • Designed to pre-warm and anneal Standard Platinum Resistance Thermometers
  • Maintenance Free Use
  • Automatic Temperature Cycling

One of the duties of a calibration laboratory manager is to ensure that the SPRTs used in the Laboratory are fully annealed and still within specification.

Just using the thermometers within the laboratory will cause work-hardening to take place within the platinum coil of the SPRT. Therefore regular annealing is required to ensure the SPRTs are in an ideal condition.

In 1990 the then new temperature scale ITS-90 specified the use of SPRTs up to the Silver point (961.78°C). At these temperatures quartz is very porous and in reducing atmospheres the SPRTs can quickly become contaminated. The Isotech Annealing Furnace offers a safe solution for those who wish to anneal SPRTs up to 1000°C.

To prevent contamination at high temperatures a constant flux of pre-heated air passes over the SPRTs being annealed. A comprehensive handbook accompanies the Furnace.

Annealing Furnace

The furnace has been upgraded to benefit from the latest technology. Fitted with a crystal clear colour display the furnace is now fully programmable. Programs can be created for the cycling of SPRTs – with the ability to set the dwell time at the annealing temperature and heat up and cool down rates along with the number of temperature cycles. Multiple programs can be stored – each with up to 25 segments. The furnace heat up cool down history is logged and can be exported to a USB drive. The PID control parameters are now dynamically optimised at different temperatures optimising furnace stability.

This Furnace is installed easily and requires no maintenance.

Specifications

Model414
Temperature RangeAmbient to 1000°C
Control0.1°C Resolution
Furnace Depth450mm
Diameter50mm
CommunicationsIncluded as standard
Power110Vac 50/60Hz 3kW or 230Vac 50/60Hz 3kW with internal transformer option
DimensionsHeight 800mm, Width 400mm, Depth 620mm, Weight 40kg
How to order414 Annealing Furnace

Documentos

  • WTP-Maintenance-Bath

    Water Triple Point Maintenance Bath

    This dedicated apparatus has more than 35 years of proven use and is widely used by the worlds’ leading NMIs. In a recent International study cells…

  • Model-17402

    Gallium Fixed Point Apparatus

    Model 17402B Gallium Apparatus is not an adaptation from general purpose equipment, but is designed specifically to realize and maintain the Gallium…

  • ISOTowers-Series

    ISOTowers

    The most accurately defined temperatures are those defining points (fixed points) of ITS-90.

  • Model-471

    Model 471 Simple Argon Apparatus

    The Isotech Argon Triple Point Apparatus has been upgraded for greater automation, efficiency, and ease of use in realising the argon triple point.

  • Oberon-Slim-Cells

    Oberon – for Slim Cells

    Model 426 is for Aluminium, Silver, Gold or Copper slim fixed point cells as well as for comparison calibration. Heat pipes provide the ideal…