TTI-22
Quite simply the Isotech TTI-22 High Accuracy Thermometer sets new standards in the price to performance ratio for industrial and secondary resistance thermometry. If you need high accuracy at an affordable price you have to look at the TTI-22.
Solicitar cotaçãoBaixar ficha técnica
The TTI-22 has an accuracy of 0.001°C and a resolution of 0.0001°C (0.00004 Ohms). It has two input channels, is lightweight (1.8kg) and will operate for more than 10 hours from two small AA cells. It has both RS232 and Ethernet ports. Simple to use, supporting both Industrial 100 Ohm probe and SPRTs to ITS-90, 25.5 and 100 Ohm. Up to 30 probe calibrations can be stored along with the calibration expiry date so the instrument can warn when the calibration time has been exceeded. Built in statistics calculation can show you both the measured and average values along with the standard deviation over previous measurements. The Isotech TTI-22 is ideal as a reference standard alongside liquid calibration baths, for the smallest uncertainty calibration with Dry Blocks or for demanding standalone measurement applications. Previously this level of performance was confined to specialist laboratories with expensive thermometry bridges; TTI-22 delivers 5 to 10 times the performance of comparably priced instruments.
| Model | TTI-22 |
|---|---|
| Inputs | 2 channel Pt100 (BS EN 60751 / IEC 751) or 25.5/100Ω SPRT to ITS-90 |
| Measuring Current | 0.41mA |
| Self Heating Test Current | 0.29mA (0.41mA / √2) |
| Measuring Time | 1.44 seconds for both channels |
| Measuring Range | -250 to 960°C (0 to 440 Ohm) |
| Resolution | Temperature: 0.0001°C, 0.1mK Resistance: 0.00004Ω, 40μΩ |
| Uncertainty of Measurement | Temperature: 0.001°C, 1mK 100 Ohm PRT Resistance: 0.4mΩ @ 20°C (instrument only, uncertainty with sensor dependent on range and sensor type.) |
| Reference Resistor | Internal 380Ω TCR ±0.3ppm / °C Stability ±5ppm / year |
| Interface | RS232, Ethernet, built-in web server provides simple temperature display |
| Ambient Temperature Range | 10°C to 30°C |
| Power Supply | 7.5VDC, 250mA power adaptor or 2 x AA batteries (typically >10 hours operating time) |
| Case Dimensions | Width 190mm Height 112mm Depth 240mm Weight 1.8kg |
The fundamental problem with surface temperature measurement is that it is subject to large stem conduction errors, also because heat conducted from…
The millisKanner channel expander has eight input channels, and each can be configured individually for SPRT, PRT, Thermistor or Thermocouple input…
Our TTI range use high quality ‘Lemo’ connectors for the Pt100 inputs. This simple accessory provides 4mm Terminal Posts for the connection of bare…
These thermocouples are suitable for use as references in Isotech Dry Blocks and for use with temperature indicators. Details of our laboratory grade…
TTI-10 brings laboratory level performance of up to 10mK (0.01°C) and resolution up to 0.001°C in a portable handheld instrument. Battery life is…
Isotech produces a miniature resistor with ultra-low temperature coefficient and ultra-high stability. This is achieved because the resistors are oil…
The Isotech Small Hotplate is a lightweight portable calibration system purpose designed for surface mounted sensors. The flat surface plate is made…
Instrumentos para cotar
Ainda não há instrumentos. É possível escrever mesmo assim: um especialista responde.
