Protective Enclosure
Protective Enclosure
The LogTag® Protective Enclosure is specifically designed for LogTag® recorder products to allow use in harsh environments.
Request a quoteDownload the datasheet
Highlights
- IP67 – Dust & Waterproof resistant
- Clear, high impact polycarbonate plastic case material
- Supports all non-External Probe products.
Overview
The LogTag® Protective Enclosure is specifically designed for LogTag® recorder products to allow use in harsh environments.
The design of the enclosure minimises the effects of thermal lag caused by the additional casing. In general, the enclosure adds about 70% to the reaction time to temperature change for a given environment.
The enclosure’s case is made from high impact polycarbonate plastic and is clear to allow viewing of the enclosed recorder’s LCD or indicators. Conservatively rated at IP67 (equivalent to NEMA6).
Supports LogTag® TRID30-7x, TRIX-8/16, SRIC-4, TRIL-8/SRIL-8, USRIC-8 products.
Technical Data
| Storage Temperature Range | -40°C ~ +85°C |
|---|---|
| Environmental | IP67 (equivalent to NEMA6) for temperatures 1°C~+40°C |
| Size | 104mm (L- not including lug) x 76.5mm (W - including clips and hinge) x 13mm D |
| Weight | 41 g |
| Case Material | Clear Polycarbonate with silicon rubber seal |
| LogTag® part code | 200-000020 |
| LogTag® models supported | TRID30-7x, TRIX-8/16, SRIC-4, TRIL-8/SRIL-8, USRIC-8 |
| Chemical resistance | In general the polycarbonate material can withstand alcohols and diluted acids well. Problems can occur with hydrocarbons, phenols, esters, ketones and alkalis especially at elevated temperatures |
| T90 thermal performance | With TRIX-8 in 1 m/s air : T90 = ~ 10 minutes. With TRID30-7x in 1 m/s air : T90 = ~ 17minutes |