Titan S8-CAN w/ 9-Pin Deutsch
The Titan S8-CAN is a state-of-the-art data acquisition system designed for diesel engines. Capable of simultaneously measuring and recording up to 23 suspect parameter numbers, the Titan S8-CAN is an all-in-one solution for diesel engine testing.
Request a quoteDownload the datasheet
The Titan S8-CAN is a remote access data acquisition logger designed to easily connect to the Controller Area Network (CAN) via its diagnostic port.
This versatile device provides the capability to monitor and record SAE J1939 compliant CAN messages from Tier 1 through Tier 4 final diesel engines. Once connected, the Titan S8-CAN has the ability to display and record up to 23 suspect parameter numbers (SPN) simultaneously during engine, road, and diagnostic testing.
The Titan S8-CAN is an all-in-one solution, allowing users to view and record simultaneously without the need for a PC or software. With 1 GB of internal memory, the Titan S8-CAN can store up to 5,000,000 readings which can be download to a USB for further analysis.
*Due to the versatility of the Titan S8, this device is calibrated to MadgeTech’s standard calibration points.
| Channels | 24: 23 can be configured for CAN data. Channel 1 cannot be CAN, and channels 2-8 can be used for direct measurements. If 1-8 are configured for direct measurements, 9-24 can still be CAN channels. |
|---|---|
| Battery Life | 7 to 9 hours continuous use |
| Material | PC / ABS Enclosure, TPE Protective Boot |
| Dimensions | 6.65 in x 4.40 in x 1.41 in (168.9 mm x 111.8 mm x35.8 mm) Data logger only. 5 in touch screen. |
| IP Rating | IP20 |
Instruments to quote
No instruments yet. An enquiry can be sent anyway: a specialist answers.
