A unit of AKRIBIS One
Request a quote

E2632

Two Channel Gas Detectors (E2632)

The instrument utilizes novel fully calibrated and temperature compensated gas sensors with excellent repeatability, stability, and long lifetime.

Request a quoteDownload the datasheet

Two Channel Gas Detectors (E2632)

Features

  • Simultaneous detection of two gases
  • Accurate and stable measurement
  • Wall-mount IP65 protected housing
  • Visual and acoustic alarms
  • Two output relays for alarm / ventilation control

Description

Two relays RE1 and RE2 with switching contacts can be used to control alarm sirens, ventilation fans, shut-off valves, or other actuators for each sensor. The detector is equipped with a visual and acoustic alarm for each sensor. 24 VAC or 230 VAC power supply options are available.

Technical Data

Sensor typeDepending on detected gases available are; Metal oxide sensors,; Electrochemical sensors
Sampling methodDiffusion
Power supply24 VDC/AC ±20% (default); or 230 VAC (optional)
Digital interfaceUART
Relay outputs2 relays with switch-over contact per sensor,; 2 × SPDT, max 5 A, 30 VDC / 250 VAC
AlarmsBlinking LEDs, buzzers 85 dB
EnclosureGrey ABS, wall mount, protection class IP65
DimensionsH123 × W201 × D55 mm
Operating conditions15...95 %RH; Atmospheric pressure ±10%; Non-Atex rated areas; The temperature depends on the sensor.

Configure the instrument

Choose the model, probes and accessories. Incompatible combinations are blocked as you go; the remaining rules are checked when the instrument is added to the quote.

Documents

  • E2611

    Gas Detectors E2611

    2 × SPST relays, 2×4-20mA/0-10V, RS485 Modbus RTU, slotted ABS 85 × 85 × 37 mm, IP20

  • E2610

    Gas Detectors E2610

    2 × SPDT relays, slotted ABS 85 × 85 × 37 mm, IP20, LEDs, buzzer, 24 VDC / 24 VAC / 230 VAC

  • E2608

    Gas Detectors E2608

    2 × SPST relays, 2 × 4-20mA / 0-10V, RS485 Modbus RTU, ABS 82 × 85 × 55 mm, IP65

  • E2618

    Gas Transmitters E2618

    transmitter only, 2×4-20mA/0-10V, RS485 Modbus RTU, grey ABS 80 × 82 × 55 mm, IP65

  • E2630

    Gas Detectors E2630

    2 x SPDT relays, ABS plastic 90 x 145 × 55 mm, IP65, LEDs, buzzer, 24 VDC / 24 VAC / 230 VAC

  • E2660

    Gas Transmitters E2660

    transmitter only, 2 x 4-20 mA / 0-10 V, RS485 Modbus RTU, grey ABS 90 × 145 × 55 mm, IP65

  • E2638

    Gas Transmitters E2638

    transmitter only (optional relays), 2 × 4-20mA/0-10V, RS485 Modbus RTU, grey ABS 90 × 145 × 50 mm, IP65

  • E2648

    Gas Transmitters E2648

    transmitter only (optional relays), 2 × 4-20mA/0-10V, RS485 Modbus RTU, grey die-cast aluminium 120 × 125 × 57 mm, IP66

  • E2639

    Gas Transmitters E2639

    E2639 is a member of the new-generation PluraSens® family of multifunctional measurement instruments.