E6600
Evikon E6600 is a safety visual and acoustic alarm device developed to protect employees in commercial and industrial refrigeration, as well as in oxygen deficient atmospheres.
Request a quoteDownload the datasheet
E6600 is fully compliant with EN 378-1:2016+A1:2021 Annex D and has autonomous operation during alarm for more than 10 hours.
The main unit, installed outside the cold room, has two built-in SPDT relays that can be used to open the door and give a signal to a plant management system at the same time.
Optional RS-485 Modbus RTU provides real-time status diagnostics and possibility to communicate with different plant monitoring systems.
The device supports connection of up to 5 emergency push button per each alarm unit (more on request) for quick response from anywhere in a large cold room.
Installed inside the cold room, the emergency button is built to perform in extreme conditions due to IP65 protection, and also has permanent LED light so that a person can quickly find it in emergency situations.
| Digital interface | RS485, Modbus RTU (optional) |
|---|---|
| Relay outputs | 2 x 3 A SPDT |
| Supply voltage | 230 VAC |
| Acoustic alarm | Piezoelectric type, power > 95 dB @ 1m |
| Visual alarm | 12 VDC LED, color RED |
| Autonomous operation during alarm | > 10 hours |
| Emergency push button | Up to 5 per each alarm unit (more on request) |
| Dimensions | H250 (H275 including cable glands) x W195 x D100mm (alarm unit); H75 × W75 × D80 mm (emergency push button) |
| Protection class | IP43 (alarm unit); IP65 (emergency push button) |
| Operating conditions | 0...+45 °C (alarm unit); -25…+70 °C (emergency push button); Down to -40 °C on request |
EK30 one-sided light module is intended to warn people in areas, where hazardous concentrations of gas can accumulate. The module has visual and…
EK32 double-sided light module is intended to warn people in areas, where hazardous concentrations of gas can accumulate. The module has visual and…
EK60 one-sided single sided light module is intended to warn people in areas, where hazardous concentrations of gas can accumulate. The module has…
EK62 double-sided light module is intended to warn people in areas, where hazardous concentrations of gas can accumulate. The module has visual and…
Е7878 modbus driver is a smart instrument which is intended to connect sounder beacon with building automation systems and related instruments.
EK61 double-sided light module with pictograms is intended to warn people in areas, where hazardous concentrations of gas can accumulate. The module…
Е7879 modbus driver is a smart instrument which is intended to connect sounder beacon with building automation systems and related instruments.
E7890 sounder beacon is intended to warn people of emergencies such as accumulation of dangerous gas concentrations.
Instruments to quote
No instruments yet. An enquiry can be sent anyway: a specialist answers.
