A unit of AKRIBIS One
Request a quote

Isorac-844

Isorac Model 844

The function of this reference unit differs from other rack mounted systems in that the temperature of the metal block in which the thermocouple and copper leads are inserted actually varies with ambient temperature. A separate output signal is produced which is proportional to the difference between the environmental temperature and the actual reference temperature. The output signal can be fed directly into a computer/data logger to give accurate compensation over a large ambient range. A ther

Request a quoteDownload the datasheet

Isorac Model 844

Features

  • Rack Mounted Ambient Referencing System
  • Large Capacity
  • Approved for Power Station Use
Isorac Model 844

Description

The reservoir temperature slowly follows the ambient temperature; an electrical compensation device is thermally integrated with the reservoir and thus senses the reservoir temperature.

The device produces an output proportional to the difference between the reservoir temperature and the reference temperature (usually 0°C). This is the signal the computer/data logger uses to compensate for the temperature of the reference probes junctions.

The output signal can be in the form of a DC mV output, 4-20 mA or from a platinum resistance thermometer. Please discuss prior to order.

Isorac Model 844

Specifications

Reference TemperatureEffectively 0°C
Temperature Gradient±0.1°C between Junctions
Stability±0.05°C per 1000 Hours
Ambient Range-20°C to +70°C
Accuracy±0.1°C per 15°C ambient span
Stabilisation Time10 mins
Thermocouple Capacity0 to 100 channels double junction referencing
Power10 Watts typical 100-130 or 208-240 VAC 50/60Hz Low level D.C. Consumption 6VA typical Passive Option Available.
Dimensions – Up to 50 ChannelsHeight 255mm Width 483mm Depth 312mm
Weight17.2kg
50 to 100 channelsHeight 309mm Width 483mm Depth 312mm
Weight20.4kg
How to orderModel 844 – Isoracs are normally uniquely specified for each order. Please discuss your exact requirements with us before ordering.
NoteNumerous special versions are available and can be supplied either in their existing forms or modified to customers’ requirements.

Documents

  • Multi-Junction-Probes

    Multi Junction Laboratory Probes

    Probes are suitable for use with all Isotech thermocouple reference units or may be used with any other equipment including ice flasks and ice point…

  • Hotbox-830

    Hotbox Model 830

    The Hotbox is housed in a robust waterproof enclosure to IP66 incorporating bottom gland plate. Fixing lugs for wall mounting are provided. Easy…

  • TRUrac-847

    TRUrac Model 847

    The TRUrac is a 0°C or elevated temperature thermocouple reference system mounted in a 19” chassis. It has been developed for situations where…

  • TRU-938

    TRU Model 938

    The TRU (Thermocouple Reference Unit) supplies a stable and accurate 0°C, or elevated reference temperature. It is a self-contained all solid-state…

  • Isobox-842

    Isobox Model 842

    The function of this reference unit differs from other cased systems in that the temperature of the metal block in which the thermocouple and copper…