A unit of AKRIBIS One
Request a quote

LPH_10

Water leakage relay LPH 10

LPH 10 monitors the resistance of the connected sensor. When the sensor becomes wet the resistance decreases. If the resistance decreases below the alarm limit, the alarm relay, indicator light and buzzer activate. The buzzer can be muted by pressing the button, but the relay and indicator light stay active until the sensor resistance increases over the alarm limit.

Request a quoteDownload the datasheet

Water leakage relay LPH 10

Technical data

Product number1187010
Power supply24 Vac/dc, < 2 VA
Setpointapprox. 10 kΩ
Relay output typeChangeover
Alarm output60 Vdc, 300 mA, res. change-over contact. Alarm is also indicated with an indicator light and buzzer.
IP protection classIP20
Product dimensions (w x h x d)87 x 86 x 32 mm
Mountingon the wall surface or on a flush mounting box (60 mm hole distance)
MaterialsABS plastic
EAN136419767012067

Documents

  • VVA_2

    Water leakage Sensor VVA 2

    VVA 2 sensor will be used with VVK 2 and LPH 10. VVA 2 can be installed e.g. on the monitored floor.

  • VVN-Series

    Water leakage Sensor VVN

    VVN sensors will be used with VVK 2 and LPH 10. VVN can be installed e.g. on the floor or on the bottom of the pipe monitoring possible condensation.

  • VVA_3

    Water leakage Sensor VVA 3

    VVA 3 sensor will be used with VVK 2 and LPH 10. VVA 3 can be installed e.g. on the monitored floor. The sensor includes adhesive tape and 2 m cable.

  • VVA_1

    Water leakage Sensor VVA 1

    VVA 1 sensor will be used with VVK 2 and LPH 10. VVA 1 can be installed e.g. on the monitored floor.

  • VVK_2

    Water leakage relay VVK 2

    VVK 2 monitors the resistance of the sensors. When the sensor becomes wet the resistance decreases and the alarm relay will be activated. Also the…