A unit of AKRIBIS One
Request a quote

PTL-Series

Pressure transmitter for liquids PTL

The PTL transmitters measure liquid pressure in heating and cooling systems. They are designed for extreme conditions where condensation is a common problem. These transmitters have a two-layer protection for electronics to protect electronics from condensation problems. These transmitters are also suitable for refrigerants and non-aggressive gases.

Request a quoteDownload the datasheet

Pressure transmitter for liquids PTL

The PTL transmitters have an analogue output signal for pressure measurement. The -A models have a current output (4...20 mA).

The PTL liquid pressure transmitters are typically used in building automation systems for district heating, liquid heat exchangers, heating subtraction, air compressor systems, district cooling, fan coil units and chilled beams.

Technical data

Medium temperature-40...125 °C
Cable length1 m
IP protection classIP65
Ambient temperature-20...100 °C
Ambient humidity0...100 %rH
Product dimensions (w x h x d)39 x 22 x 78 mm
MountingG1/2" thread
MaterialsStainless steel

Configure the instrument

Choose the model, probes and accessories. Incompatible combinations are blocked as you go; the remaining rules are checked when the instrument is added to the quote.

Documents

  • VPL-Series

    Water Pressure Transmitter VPL

    VPL 16- pressure transmitter (3-wire) for heating and cooling systems. VPL 16 has four selectable ranges up to 16 bar.