A unit of AKRIBIS One
Request a quote

TEPK-M-Series

Strap-on Temperature Transmitter TEPK-M

TEPK-M temperature transmitter is designed for measuring heating and cooling water temperatures in HVAC automation systems. The sensor is mounted on the pipe by using the heat resistance cable tie. The ML-SER commissioning tool can be used to make one point field calibration and to change the temperature output to controller output.

Request a quoteDownload the datasheet

Strap-on Temperature Transmitter TEPK-M

Technical data

CommunicationModbus RTU
Power supply24 Vac/dc, < 1 VA
Temperature measurement range0...50 °C, 0...100 °C, -50...50 °C, -50...150 °C
Temperature measurement accuracy±0.5 °C
Probe41 x 15 x 6 mm
Cable dimensionsØ 3.2 mm x 2 m (LIYY 2 x 0.14 mm²)
SensorPt1000 EN 60751/B
Voltage output0...10 Vdc, 2 mA (temperature or controller)
IP protection classIP54
IP protection class notecable downwards
Cable glandM16
Mountingprobe: by a plastic band on the pipe (Ø10...100 mm), housing: by screws
MaterialsPBT, PC, PA, zink casting

Configure the instrument

Choose the model, probes and accessories. Incompatible combinations are blocked as you go; the remaining rules are checked when the instrument is added to the quote.

Documents

  • ML-SER

    Configuration tool ML-SER

    ML-SER commissioning tool is designed for easy commission and configuration of Produal first-generation transmitters. The ML-SER shows…