Uma unidade da AKRIBIS One
Solicitar cotação

Saturn-877

Saturn Model 877

The Saturn spherical furnace comprises a number of concentric shells. The outer shell of spun metal is for containment and support. Inside this is a layer of ceramic fibre. Within the fibre is a ceramic spherical mantle containing the heater windings. In the centre of the furnace is a solid cast ceramic sphere with 8 or 16 tubes, to be used for the thermocouples requiring calibration.

Solicitar cotaçãoBaixar ficha técnica

Saturn Model 877

Features

  • Accuracy 0.25°C at 1000°C
  • Thermocouple Calibration Furnace to 1300°C
  • Central Zone of Zero Heat flux
Saturn Model 877

Description

Isotech’s calibration furnace is revolutionary from a number of aspects:

It is spherical, and its design ensures a central zone of constant temperature.

Thermocouples are inserted around the circumference of the furnace. When fully inserted the measuring junctions are within a few millimeters of each other at the centre of the sphere.

Up to 15 thermocouples can be calibrated simultaneously. The accuracy is between ±0.25°C and ±0.1°C at 1000°C.

Larger tube diameters will give larger gradients, as will larger numbers of tubes. The precision of this furnace has previously been achieved only by using heat pipes. Because of the design the price is only one half to one third that of a bath with comparable accuracy and much smaller capacity of calibration.

The use of newly developed modern ceramic materials has enabled high accuracy, low mass and high stability to be obtained. The Saturn system will not contaminate your thermocouples unlike some furnaces that have metal equalising blocks.

Saturn Model 877

Specifications

Model877
Temperature Range100°C to 1300°C
Number of Calibration Points8 as standard, 16 to special requirements
Diameter of sensors4 x 6mm + 4 x 8mm
Depth of Immersion180mm
Accuracy±0.25°C to ±0.1°C at 1000°C (using comparison techniques)
Warm-up Times*1 hour to 700°C 3 hours to 1300°C
Stabilisation Time*1 hour to ±0.25°C

*these times may increase as the windings age or if the supply voltage is low.

Power3kW, 208-240Vac, 50/60Hz 3kW 115Vac, 50/60Hz
Dimensions425mm Diameter, weight 25kgs
Accessories877/01 Equalising Block 4 x 8mm + 4 x 6mm i.d. (standard), 877-01S Equalising Block 16 x 6mm (special), 877/01E Equalising Block – other configurations (contact Isotech) – 877/02 Platinum Foil Temperature Barrier.
How to order877 Thermocouple Calibration Facility including Standard Equalising Block. Please specify voltage needed.

Documentos

  • Orion-796-Series

    Orion Model 796

    The Isotech Hydra range of calibration baths have proved very successful since their introduction in 2003. The Orion range has been introduced to fit…

  • Libra-785-Series

    Parallel Tube Liquid Bath Libra Model 785

    Isotech calibration baths employ sophisticated designs to ensure calibration to the smallest of uncertainties. In 1986 Isotech purchased the…

  • Model-18205

    Nitrogen Boiling Point Apparatus Model 18205

    Isotech Nitrogen Boiling Point Apparatus is designed specifically to realise and maintain the liquid/vapour equilibrium (boiling point) of nitrogen…

  • SPRT-909

    Isotech Model 909 SPRT

    This economically-priced Standard Platinum Resistance Thermometer, Model 909, is the workhorse of calibration laboratories all over the world. During…

  • Model-459

    Cryostat Model 459

    When we considered low temperature comparison calibration, we had to take into account Health and Safety considerations, both of the liquids used in…