ET243
ET243 surface temperature sensor is designed for measuring temperature on closed pipe systems or other round or flat surfaces. The sensor can be conveniently fixed with a nylon cable tie without any mechanical preparation of the measurement site.
Request a quoteDownload the datasheet
Indirect temperature measurement avoids disturbing flow of the medium and the measurement object is hardly affected by the low thermal mass of the sensor. On the other hand, lack of pressure and chemical effects ensures longer lifespan of the sensor.
It must be considered that large differences in temperature between the measurement medium and surroundings have a direct effect on the measurement result. In such cases, additional insulation around the sensor and the cable in at least 10 cm range is advisable. To improve heat transfer from surface to the sensor, heat-conductive paste can be supplied.
| Sensing element | Pt1000 EN60751 Class A |
|---|---|
| Measurement ranges | -40...+70 / 80 °C (with LiYY cable) |
| (continuous / peak) | -30...+70 / 105 °C (with LiYwYw cable) |
| Protection class | IP67 |
| Body | A4 stainless steel |
| Dimensions | 24×5,5×6,5 mm |
| Encapsulation | polyamide (nylon) |
| Cable | (LiYY or LiYwYw) 2×0,25 mm2 / 2×0,22 mm2; outer diameter 3,3 / 3,7 mm |
| Cable insulation | PVC |
| Fits pipes | Ø16...60 mm |
Choose the model, probes and accessories. Incompatible combinations are blocked as you go; the remaining rules are checked when the instrument is added to the quote.
Loading the options…
A code can be pasted and the configuration builds itself.
They are quoted separately: the instrument need not be configured.
ET741 series pipe surface temperature sensors are designed for measuring temperatures of hot water pipes in HVAC applications.
ET241 series surface temperature sensors are designed for measuring temperatures on closed pipe systems or other round or flat surfaces. The sensor…
ET203 temperature sensor is designed for floor-heating and HVAC systems.
ET231 Series surface thermometers with bayonet lock are intended for measuring temperatures in solids, on bearings and moulding tools, for example in…
ET244 surface temperature sensor is designed for measuring temperature on flat or slightly curved surfaces. The sensing element is encapsulated in a…
Instruments to quote
No instruments yet. An enquiry can be sent anyway: a specialist answers.
