
Cutting Edge Wireless Technology for Environmental Monitoring
The Vaisala viewLinc Monitoring System tracks environmental conditions wirelessly using Vaisala’s VaiNet wireless devices based on LoRa®* technology…
Application note
Ammonia is widely used in a variety of industries. Emissions of ammonia are of great concern as they contribute to several environmental problems including eutrophication and contamination of groundwater. Moreover, ammonia is very corrosive and may cause breathing problems at concentrations above 50 ppm and is considered poisonous in greater quantities.

Chemical Curve: Ammonium sulphate R.I. per % b.w. at Ref. T of 20 °C.
Wet scrubbing is used successfully to control ammonia emissions, achieving efficiencies up to 99 %. However, wet scrubbers create effluents that need to be treated and disposed.
In acid scrubbing, a strong acid is added to the scrubbing liquid to react with the ammonia and to produce an ammonium salt, which can be safely discharged to a drain or wastewater treatment plant or sold as a liquid or solid fertilizer.
Typical ammonia scrubbers recycle liquid from the bottom to the top of the scrubber. This allows the scrubber to operate at reasonable wetting rates without the need for excessive acid addition or purge of liquid.
In continuous gas-liquid absorption systems, the concentration of the recycled solution is always controlled to ensure the proper acidic condition for scrubbing (usually a pH of 3 and 6) and to maintain the driving force by acid replenishment. The dosage of acid and water is controlled based on the pH and concentration of the scrubbing liquid.
Vaisala Polaris™ PR53M Process Refractometer monitors continuously the concentration of the bottom product of the scrubber. The reading from the refractometer can be configured to show the preferred control unit, for example, Total Dissolved Solids (TDS) or density.
The refractometer’s signal is used to control automatically the concentration of the recycle line to the scrubber by the addition of fresh acid. This ensures the optimal conditions for ammonia absorption.
A second refractometer controls the dilution of the acid. The refractometer’s output signal can be used as feedback to control the water and acid feed valves to achieve the target concentration.
The design of the PR53M Process Refractometer makes it safe for use in processes involving corrosive chemicals, such as ammonium salts and strong acids.

Description
The Vaisala Polaris PR53M PTFE-Body Process Refractometer is for chemically aggressive solutions and ultra-pure fine chemical processes. The PR53M can be mounted to ½ inch process lines with a standard NTP-threaded connection, or optional pillar or flare fittings.
Measurement range
Refractive Index (nD) 1.3200 – 1.5300, corresponding to 0-100 % by weight.

The Vaisala viewLinc Monitoring System tracks environmental conditions wirelessly using Vaisala’s VaiNet wireless devices based on LoRa®* technology…

One of the most important requirements to reduce cooling costs is to measure conditions properly in the first place. The first things to consider are:

Carbon dioxide and other gases consisting of two or more dissimilar atoms absorb infrared (IR) radiation in a characteristic, unique manner. Such…

Another approach to preventing explosions is to install electrical equipment inside of “explosion proof” housings. These housings can withstand…
A specialist replies with the solution, the instrument and the service that fit.
Products to quote
No products yet. An enquiry can be sent anyway: a specialist answers.